DelataPlus Zircon Safety Helmet 8 Point Harness Slide Adjuster

  • Product Code: SZIRCON
  • Availability: in stock
  • £3.58

    Lowest price
    EXCL VAT
  • £4.30 inc. VAT

  EN 50365 Class:0 (2002) 8 point plastic harness  deltaplus brand

1+ 10+ 20+ 30+ 40+
£4.98 (£4.15 ex. vat) £4.79 (£3.99 ex. vat) £4.62 (£3.85 ex. vat) £4.45 (£3.71 ex. vat) £4.30 (£3.58 ex. vat)
Colour Qty
ORANGE
YELLOW
RED
WHITE
BLUE
BLACK
GREEN
GREY
Total price: £0.00 £0.00 ex. vat Add to Basket


Deltaplus Zircon1 Safety Helmet 8 point fixing

Excellent value with this UV resistant HDPE Hard Hat
8 Point fixing cradle made from polyethylene.
Integral sweatband which can be replaced
Fits head sizes 53 to 63cm.
Available in 7 colours


Tested & conforming to PPE Directive 89/686/EEC
EN397:2012 + A1:2012 Protective helmets for industry
+50°C -10°C Standard temperatures - -10°C / +50°C
440VAC Electric insulation
EN50365:2002 Electrically insulating helmets for use on low voltage installations  
CLASS 0

Electrical Insulation up to 1 000 V.A.C. or 1 500 V.D.C.



EN397:2012 + A1:2012 Protective helmets for industry  

+50°C -10°C Standard temperatures - -10°C / +50°C

440VAC Electric insulation

Protective helmets for industry.


MANDATORY

- Impact*: force transmitted to the headform must not exceed 5 kN at the fall of an object of 5 kg from a 1m height.

The impact energy of the helmet at the end of the test is 49 J.

- Penetration*: the tip of the mass used in the test (3 kg over 1m) must not come into contact with the skull.

- Flammability: the helmet should not burn with flame emission more than 5 seconds after removal of the flame.


* The impact and penetration tests are performed at room temperature, at 50°C and at -10°C 

OPTIONAL

In extreme temperatures: impact and penetration tests are conducted at room temperature at 150°C, at -20°C or -30°C.

Protects against lateral compression.

The maximum deformation of the helmet should be ≤ 40 mm.

Protects against accidental short-term contact with a live electrical conductor up to 440 VAC 

Resistance to molten metal splashes

EN50365:2002 Electrically insulating helmets for use on low voltage installations  

CLASS 0 Casques électriquement isolants - Classe 0

Electrical insulation helmets for use in low voltage environment.


MANDATORY


Electrically insulating helmets for use near energized equipment not exceeding 1000 VAC or 1500 VDC (appliance class 0).

Used simultaneously with other electrically insulating protective equipment, these helmets prevent dangerous currents passing through to the person's head.

These optional electrical insulation tests are more stringent than the EN397 and they complement them.

(2 triangle marking, Class 0).


head sizes 53/63 cm. Manual Adjustment

Related Products

Lightweight Rainwear Polyester/PVC Rain Suit
Available

Lightweight Rainwear Polyester/PVC Rain Suit

ONBDS


  • High Value For Money
  • Fully Taped Seams
  • Lightweight & Portable



From £12.68
ex. vat

Evaporative Cooling Hard Hat Liner with Neck Shade
in stock

Evaporative Cooling Hard Hat Liner with Neck Shade

SCV03


  • Lightweight & Comfortable 
  • UV Protection Design 
  • Extended Cooling Effect

Portwest brand

From £5.60
ex. vat

4 Point Chin Strap with Buckle Release Deltaplus
in stock

4 Point Chin Strap with Buckle Release Deltaplus

SJUGALPHA4

  

From £1.95
ex. vat

Basic 2 Point Chin Strap Deltaplus
in stock

Basic 2 Point Chin Strap Deltaplus

SJUGALPHA2

  

From £0.82
ex. vat

2 Point Chin Strap for Hard Hats Deltaplus
in stock

2 Point Chin Strap for Hard Hats Deltaplus

SMENTALPHA

  

From £0.98
ex. vat

Hard Hat Replacement Nylon/Towelling Foam Sweat Band
in stock

Hard Hat Replacement Nylon/Towelling Foam Sweat Band

SBASALPHA

  

From £0.56
ex. vat

Delataplus Toric T5 Green Shade 5 High Energy Impact Visor
IN STOCK

Delataplus Toric T5 Green Shade 5 High Energy Impact Visor

STORICT5

  High energy impact 190 m/sec. Extreme temperature THERMAL RISK          Molten Metal splashes and Hot solids projections deltaplus brand

From £15.73
ex. vat

Browguard Holder with Steel Wire Mesh Visor
IN STOCK

Browguard Holder with Steel Wire Mesh Visor

SPW93

  Low Energy Impact  45 m/sec  portwest brand 

From £6.57
ex. vat

Helmet Mounted Safety Glasses Adjustable, Foldaway
in stock

Helmet Mounted Safety Glasses Adjustable, Foldaway

SFUEGO

 Class 1  Suitable for continuous use Low Energy Impact Extreme temperature UV Filter (EN170) clear lens deltaplus brand 

From £3.51
ex. vat

Evaporative Cooling Head Band Blue or Black
in stock

Evaporative Cooling Head Band Blue or Black

SCV04


  • Lightweight & Comfortable
  • UV Protection Design 
  • Extended Cooling Duration

Portwest brand

From £5.27
ex. vat

Evaporative Cooling Arm Sleeve / pair
in stock

Evaporative Cooling Arm Sleeve / pair

WWCV08

Portwest brand

From £7.28
ex. vat

Evaporative Cooling Class 2 Orange Waistcoat
in stock

Evaporative Cooling Class 2 Orange Waistcoat

HVCV02

  Portwest brand 

From £31.20
ex. vat

Cooling Helmet Sweatband
in stock

Cooling Helmet Sweatband

SCV07


  • 8 Hours Cool 
  • 100% Cotton 130g
  • Lightweight & Comfortable

Portwest brand

From £5.85
ex. vat

Evaporative Cooling Neck Scarf
in stock

Evaporative Cooling Neck Scarf

WWCV05

50+ UPF rated fabric to block 98% of UV raysPortwest brand

From £3.32
ex. vat

Carry More Zip Up Class 2 Vest with Harness Access
in stock

Carry More Zip Up Class 2 Vest with Harness Access

HVMW71890


  • Class 2 High Visibility
  • Vented Mesh Back
  • Ample Storage Space

 

From £13.16
ex. vat

Premium Carry More Padded Collar Class 2 Vest with Harness Access
in stock

Premium Carry More Padded Collar Class 2 Vest with Harness Access

HVMW18906


  • Class 2 High Visibility
  • Padded Collar Comfort
  • Vented Mash Back

 

From £19.74
ex. vat

Evaporative Cooling Towel 66 x 21cm
in stock

Evaporative Cooling Towel 66 x 21cm

SCV06


  • Lightweight PVA Padding
  • Extended Cooling Effect
  • Advanced Drying Features

Portwest brand

From £2.93
ex. vat