Sheet Metal Handling Gloves

When handling sheet metal, it is important that all of our workforce is properly safe and the best protective equipment is used. Using high quality sheet metal handling gloves is one of the first steps to ensure safety and avoid the many significantly dangerous potential hazards. There is the possibility for creating open lacerations and severely deep cuts, especially during the manufacturing process of sheet metal. Aside from cut hazards, sheet metal is also highly conductive to thermal energy and when working with flame or hot environments, metal can become incredibly hot. Indeed it can also become extremely cold when left outside within sub zero temperatures, so once again requires high quality sheet metal handling gloves to avoid these issues.

Product Compare (0)

Sort By:

Show:

IN STOCK

Dexcut Air Lite Cut Level C Foam Nitrile Coated Wonder Grip Gloves

GWG640

CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant a size 9 glove weighs 38g Wonder Grip certifies that all the raw materials used in the manufacture of its products conform to European Union regulations (regulation n°1907/2006) oeko-tek standard Wonder Grip Technology GRIP THERMO-SET PRE-CURVED DESIGN TECHNOLOGY

From £4.59
ex. vat

IN STOCK

Dexcut Cut Resistant 5 D Fully Coated Nitrile Liquid Proof Safety Gloves

GWG-718B

CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant contact heat resistance to 100C Weight of Single Size 9 Glove wonder grip brand

From £8.14
ex. vat

IN STOCK

Opty Wonder Grip OP 775 Cut C PU Palm Safety Gloves

GOP775

CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant 13-gauge Thirteen stitches knitted per inch, lightweight styles wonder grip brand

From £3.68
ex. vat

IN STOCK

Wonder Grip 787 Dexcut Cut Level 5 D Sandy Nitrile Grip Gloves

GWG787

CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant contact heat 100C food safe Tsunooga™ polyethylene fibre

From £6.49
ex. vat

IN STOCK

Cut C Smartswipe Milwaukee Textured Nitrile Coated Safety Gloves

GMW7142X

CAT II Intermediate Risk 4 out of 4 abrasion resistant Touch screen compatible 1 size 9 glove weighs 33g

From £7.59
ex. vat

IN STOCK

Showa 310 Heavy Work Latex Grip Glove

G310OR

Cat II Intermediate Risk Weight of single size 9 glove Made by Showa

From £2.29
ex. vat

IN STOCK

Cut F Highest Cut Resistant PU Palm Safe-T Safety Gloves

GST5108F

Best Price Cut F
Lightweight PU Coat
Maximum Cut, Abrasion

Check Safety Standards ▼

From £1.55
ex. vat

IN STOCK

Cut F Highest Cut Resistant Klass TEK6000 Foam Nitrile Palm Safety Gloves

GTEK6000

Micro Foam Coating
Cut Level F & Cut 5
Oil and Wet Grip

Check Safety Standards ▼

13-gauge Thirteen stitches knitted per inch, lightweight styles

KLASS BRAND SIZES SMALL TO 2XLARGE

From £2.89
ex. vat

IN STOCK

Klass Protecta Plus EXtreme PU Coated Cut 5 / F Thumb Crotch Safety Gloves

GPROT+X

CAT II Intermediate Risk EN388:2016 4/4 Abrasion, 5/5 Cut, 4/4 Tear, 3/4 Puncture, ISO Cut F CUT F 30 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch a size 9 glove weighs 28g 13-gauge Thirteen stitches knitted per inch, lightweight styles

From £4.20
ex. vat

IN STOCK

Pawâ Latex Coated DuPont Kevlar and Steel Cut E Heat Safety Gloves

GPG520

Cat II Intermediate Risk EN388:2016 3/4 abrasion, X not tested to old standard for cut, 4/4 Tear, 2/4 puncture, Cut E CUT E 22 NEWTONS FORCE EN407 Contact Level 2 250C Contact Heat Protection to 250C a size 9 glove weighs 54g

From £5.15
ex. vat

IN STOCK

DeltaPlus Venicut Cut F Extreme PU Coated Long Cuff Gloves

GVEXTF03

CAT II Intermediate Risk CUT F 30 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch 13-gauge Thirteen stitches knitted per inch, lightweight styles deltaplus brand

From £5.53
ex. vat

in stock

Klass Protecta Plus Gloves 4543 Cut 5 Level F to size XXXL

GPROTPLUS

CAT II Intermediate Risk CUT 5, CUT F 30 NEWTONS 4 out of 4 abrasion resistant a size 9 glove weighs 27g 13-gauge Thirteen stitches knitted per inch, lightweight styles Made by Klass

From £3.99
ex. vat

IN STOCK

Portwest Dytec Cut Level F 13 gauge Lightweight Nitrile Foam Coated Gloves

GCT67

CAT II Intermediate Risk CUT F 30 NEWTONS FORCE 4 out of 4 abrasion resistant 360° Breathability Wash at 40°C using non-biological detergent 13-gauge Thirteen stitches knitted per inch, lightweight styles

From £7.93
ex. vat

IN STOCK

Tough Work Level F 13 Gauge Safety Liner Sandy Nitrile Safety Gloves

GA667

From £6.24
ex. vat

IN STOCK

Venicut Cut Xtreme Foam Nitrile TPU High Performance Gloves

GVEXTF02

Ultra Thin 18 Gauge
Breathable
Touch Screen

Check Safety Standards ▼

18 gauge Eighteen stitches knitted per inch, ultra lightweight styles

From £9.19
ex. vat

IN STOCK

Blue Latex Palm on Aramid and Steel Cut Level D Safety Gloves

GA611

Cat II Intermediate Risk CUT D 15 NEWTONS FORCE

From £3.59
ex. vat

IN STOCK

Nitrex 242D Foam Nitrile/PU Touch Screen Hydrophobic Work Gloves Level D Cut Gloves

GNX242D

Cat II Intermediate Risk UKCA certified CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant Touch screen compatible 13-gauge Thirteen stitches knitted per inch, lightweight styles Breathable Liner hydrophobic water repellent coating UNIGLOVE BRAND size 6 to 11

From £7.15
ex. vat

in stock

Showa 330 Re Grip Reinforced Thumb Latex Coated Work Glove

G330

EN388 2/4 Abrasion, 1/5 Cut, 4/4 Tear, 1/4 Puncture

Colour available

From £3.12
ex. vat

IN STOCK

Portwest Liquid Pro Cut Fully Coated Latex Cut D Waterproof Safety Gloves

GAP81

CAT II Intermediate Risk EN388:2016 Abrasion/3 Tear/4 Puncture/2 IOS Cut D CUT D 15 NEWTONS FORCE Waterproof portwest brand

From £4.49
ex. vat

IN STOCK

Pawâ PG330 L/Weight Breathable ISO Cut B Safety Gloves

GPG330

CAT II Intermediate Risk CUT B - 5 NEWTONS FORCE 4 out of 4 abrasion resistant Breathable Pawa superior range from Supertouch a single size 9 glove weighs 29g

From £3.74
ex. vat

IN STOCK

ST Green Deflector F Highest Cut Resistant Score Sandy Foam Nitrile Gloves

G7673x

CAT II Intermediate Risk 4 out of 4 abrasion resistant Traffic Light System Red Cut 1, Orange Cut 3, GREEN CUT 5 a size 9 glove weighs 46g 13-gauge Thirteen stitches knitted per inch, lightweight styles Supertouch brand

From £4.41
ex. vat

IN STOCK

DeltaPlus Venicut Cut 5 Latex Coated Palm Gloves

GVEN52

CAT II Intermediate Risk EN388:2016 4/4 Abrasion, 4/4 Tear, 3/4 Puncture ISO Cut D EN407 Contact Level 2 250C CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant Heat Protection to 250C made by DeltaPlus

From £4.99
ex. vat

IN STOCK

Breathable Pawâ ISO Test Cut D Micro Foam Nitrile Coated Palm Gloves

GPG530

CAT II Intermediate Risk EN388:2016 4/4 Abrasion, 4/4 Tear, 3/4 Puncture ISO Cut D CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant 360 breathable Reinforced thumb crotch a size 9 glove weighs 37g Pawa premium gloves from Supertouch

From £4.75
ex. vat

in stock

Deltaplus Venicut 58G3 ISO Test Cut 5/D Knitted Econocut® Glove -PU Coated Palm

GVEN58G3

CAT II Intermediate Risk EN388:2016 4/4 Abrasion, 4/4 Tear, 3/4 Puncture ISO Cut level D CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant made by DeltaPlus

From £2.65
ex. vat

in stock

PU Palm Coated Lightweight Rhino Yarn Cut Resistant E Safety Gloves

G55-5110

Dexterity & Comfort
Enhanced Grip
Cut Resistant Level E

From £5.27
ex. vat

IN STOCK

Deltaplus Venicut57GR ISO Test Cut D Knitted Econocut® Glove - Nitrile Coated Palm

GVEN57G

CAT II Intermediate Risk EN388:2016 4/4 Abrasion, 4/4 Tear, 4/4 Puncture ISO Cut D CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant Made by DeltaPlus

From £2.70
ex. vat

in stock

Portwest Dytec Fibre 14" (35cm) Maximum Cut Level F Safety Sleeve (each)

GCT90

CAT II Intermediate Risk CUT F 30 NEWTONS FORCE 7-gauge Seven stitches knitted per inch, heavy-weight styles OEKO-TEX® approved

From £7.22
ex. vat

IN STOCK

Cut Level E Foam Nitrile Coated Safe T Safety Gloves

G5201R

CAT II Intermediate Risk CUT E 22 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch

From £2.83
ex. vat

IN STOCK

High Level Cut E Sandy Nitrile Coated Safety Gloves Pawa PG515

GPG515

Cat II Intermediate Risk CUT E 22 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch Pawa brand medium, large, xlarge

From £4.35
ex. vat

IN STOCK

Leather Welding Sleeves 40 cm Class 2 / Pair

FRSW20

From £7.15
ex. vat

in stock

Traffi TG6010 Cut Level F PU Palm Coated Safety Gloves

GTG6010

CAT II Intermediate Risk CUT F 30 NEWTONS FORCE Touch screen compatible 15-gauge Fifteen stitches knitted per inch, ultra-lightweight styles TRAFFI BRAND

From £9.13
ex. vat

IN STOCK

BizWeld Flame Resistant Sleeves / pair

FRBZ11

EN ISO 11611 Class 1 A1+A2 EN ISO 11612 A1+A2, B1, C1, E2, F1 PORTWEST BRAND Bizweld: 100% Cotton, FR Finish 330g

From £6.31
ex. vat

IN STOCK

Pawâ PG535 Lightweight 18 gauge Cut Level D PU Coated Safety Gloves

GPG535

Cat II Intermediate Risk CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch TOUCH SCREEN CAPABLE Pawa by Supertouch small medium large xlarge

From £3.97
ex. vat

IN STOCK

Cut Level 5 / D Safety Bib Apron

WWCR01

EN388 1542D CUT D 15 NEWTONS FORCE

Portwest brand SMALL TO 3XLARGE

From £46.67
ex. vat

Available

Cut Level 5 / D Safety Combat Trousers

WWCR40

Cat 2 Intermediate risk UKCA certified EN388 1542D CUT D 15 NEWTONS FORCE Portwest brand SMALL TO 3XLARGE

From £59.15
ex. vat

IN STOCK

Tek Blue Cut 5 C Sandy Nitrile Safety Glove with Thumb Crotch

GTEKBLUE

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch Made by Klass

From £3.50
ex. vat

IN STOCK

Dytec Klass 18 gauge Ultra Lightweight Cut C Foam Nitrile Safety Gloves

GTEK8000

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant a size 9 glove weighs 21g DYTEC fibres

From £3.90
ex. vat

in stock

Klass Tek 5C PU Coated Cut Level C Safety Gloves

GTEK5C

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant a size 9 glove weighs 29g

From £1.30
ex. vat

in stock

Eco Cut B Textured PU Coated Safety Gloves

GA635

CAT II Intermediate Risk CUT B - 5 NEWTONS FORCE 4 out of 4 abrasion resistant Portwest brand

From £1.69
ex. vat

IN STOCK

Cut C Touch Screen with Thumb Crotch Breathable Pawa PG310 Safety Gloves

GPG310

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch TOUCH SCREEN CAPABLE 360 Breathable a size 9 glove weighs 40g PAWA brand

From £3.45
ex. vat

IN STOCK

Cut Level C Heat Resistant PU Coated Safety Gloves

GA622

CAT II Intermediate Risk en388:2016 4X43C CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant en407: X1XXXX 100°C contact heat resistance Portwest brand size 6 to 12

From £2.77
ex. vat

IN STOCK

Klass Tek Cut Level 5 Black PU Palm Coating on HPPE Grey Liner Safety Gloves 4543

GTEK5000/5

CAT II Intermediate Risk 4 out of 4 abrasion resistant Made by Klass

From £2.90
ex. vat

IN STOCK

Maximum Cut Level F Leather Palm on 13 gauge HPPE Yarn Safety Glove A674

GK9C-A674

maximum cut level F 4 out of 4 abrasion resistant 13-gauge Thirteen stitches knitted per inch, lightweight styles Portwest brand

From £7.32
ex. vat

IN STOCK

Pawâ PG510 ISO Cut D Oil Proof Micro Foam Nitrile Gloves

GPG510

CAT II Intermediate Risk CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant Pawa by Supertouch a single size 9 glove weighs 60g

From £4.35
ex. vat

IN STOCK

DeltaPlus Venicut 58g Cut Level 3 Knitted Econocut

GVEN33G3

CAT II Intermediate Risk Cut Level 3, New ISO Cut Level C Colour Available Made by Delta Plus Size 6 (XSmall) to 11 (2XLarge)

From £1.99
ex. vat

Only 8 Left

Showa 240 Flame, Heat, Arc Flash & Cut Protection Gloves

GSHO240

CAT II Intermediate Risk EN388 3/4 Abrasion, 5/5 Cut, 3/4 Tear, 1/4 Puncture EN407 Score 4/4 Flammability, 2/4 Contact, 2/4 Convective, 1/4 Radiant, 2/4 Molten Drops, X/4 Molten Heat Protection to 250C Colour Available Made by Showa

From £12.50
ex. vat

IN STOCK

Klass Tek Green Cut Level C PU Palm Coating on HPPE Liner Safety Gloves

GTEK5000G

CAT II Intermediate Risk 4 out of 4 abrasion resistant Made by Klass

From £2.90
ex. vat

IN STOCK

Best Price Cut 3 Venicut Knitted Econocut ISO Cut B

GVEN34G3

CAT II Intermediate Risk EN388 4/4 Abrasion, 3/5 Cut, 4/4 Tear, 3/4 Puncture Colour Available Made by Delta Plus Size 6 (XSmall) to 11 (2XLarge)

From £2.05
ex. vat

IN STOCK

Portwest ISO Cut Level B Heat Resistant PU Palm Coated Safety Gloves

GA620

CAT II Intermediate Risk 4 out of 4 abrasion resistant Colour Available

From £2.38
ex. vat

IN STOCK

Klass Tsunooga Fibre Traffic Light Green 15 gauge Lightweight PU Coated Cut 5 Safety Gloves

GS900

CAT II Intermediate Risk 4 out of 4 abrasion resistant Traffic Light System Made by Klass

From £4.05
ex. vat

in stock

TEK1000 Tsunooga PU Palm Coat Cut Level 4 Safety Gloves 4443

GTEK1000

CAT II Intermediate Risk Weight of Single Size 9 Glove Made by Klass

From £3.90
ex. vat

IN STOCK

Portwest Traffic Light Orange AMBER CUT - Nitrile Foam - A643 Safety Cut Gloves

GA643

CAT II Intermediate Risk 4 out of 4 abrasion resistant Traffic Light System Weight of Single Size 9 Glove Colour Available

From £2.95
ex. vat

in stock

Klass Tek 3000 Cut Level 3 Black PU Palm Coating on HPPE Grey Liner Safety Gloves 4343

GTEK3000

CAT II Intermediate Risk EN388 4/4 Abrasion, 3/5 Cut, 4/4 Tear, 3/4 Puncture Cut Level 3 Weight of Single Size 9 Glove Made by Klass

From £1.95
ex. vat

in stock

Water Based PU Coat Cut 4 Gloves DMF, Solvent, Lint & Silicone Free 4443

GTEK1002

CAT II Intermediate Risk EN388 4/4 Abrasion, 4/5 Cut, 4/4 Tear, 3/4 Puncture Cut Level 4 4 out of 4 abrasion resistant Weight of Single Size 9 Glove Colour Available Made by Klass

From £4.09
ex. vat

IN STOCK

Klass Cut & 100 Degree Heat Resistant Aramid Fibre & Nitrile Knuckle Coated Safety Gloves

GTEK530

CAT II Intermediate Risk 4 out of 4 abrasion resistant Heat Protection to 100C Made by Klass

From £4.80
ex. vat

in stock

Kutlass PU300 Grey PU Palm Coat on HPPE Liner Cut Level 3 / B Gloves

GKPU300

CAT II Intermediate Risk 4 out of 4 abrasion resistant Weight of Single Size 9 Glove Made by UCI

From £3.25
ex. vat

Only 30 Left

Tilsatec Cut D Ultra Lightweight 18 gauge Rhinoyarn PU Coated Gloves

G58-4110

Cut Level D Protection
Lightweight & Breathable
Premium Enhanced Grip

From £5.09
ex. vat

IN STOCK

Warrior Protects Cut F 13 gauge Sandy Nitrile Palm Safety Gloves

GDWGL080

CAT II Intermediate Risk CUT F 30 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch a size 9 glove weighs 53g 13-gauge Thirteen stitches knitted per inch, lightweight styles warrior brand

From £3.58
ex. vat

IN STOCK

Hantex® Cut 5 New Test Cut C Sandy Nitrile Coated Safety Gloves

GHX5SN

CAT II Intermediate Risk 4 out of 4 abrasion resistant

From £3.70
ex. vat

IN STOCK

Hantex® HX5 New Test Cut D PU Coated Safety Gloves

GHXPU5

CAT II Intermediate Risk en388:2016 4X43D CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant hantex brand size 6 to 11

From £2.99
ex. vat

IN STOCK

Typhan NX8 EN388 ISO Cut Level E Sandy Nitrile Coated Safety Gloves

GTYPNX8

CAT II Intermediate Risk en388:2016 4X43E CUT E 22 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch Made by Uci sizes 6 to 11

From £4.87
ex. vat

IN STOCK

Uci Blue Latex Palm on DuPont Kevlar Cut Level 5 Safety Gloves

GX5SUMO

Cat II Intermediate Risk EN388 4/4 Abrasion, 5/5 Cut, 4/4 Tear, 4/4 Puncture, Contact 2 Heat 250C EN407 Contact Level 2 250C CUT E 22 NEWTONS FORCE 4 out of 4 abrasion resistant Heat Protection to 250C Made by UCI Sanitised Weight of single size 9 glove

From £5.54
ex. vat

Only 21 Left

Uci Kutlass LDX500 Blue Latex Palm Cut Level D Safety Glove

GKUTLXD500

CAT II Intermediate Risk CUT D 15 NEWTONS FORCE Made by UCI

From £2.50
ex. vat

IN STOCK

Uci Kutlass Ultra Maximum Cut Level F PU Coated Safety Gloves

GULTRA-PU

CAT II Intermediate Risk Cut Level 5, New ISO Cut Level F

From £4.95
ex. vat

IN STOCK

Uci Kutlass Ultra Maximum Cut Level F Sandy Nitrile Coated Safety Gloves

GKUTULTRA

CAT II Intermediate Risk EN388:2016 4/4 Abrasion,5/5 Cut, 4/4 Tear, 3/4 Puncture, ISO Cut F Cut Level 5, New ISO Cut Level F

From £7.35
ex. vat

IN STOCK

Uci Kutlass® NX-500 Nitrile Foam Palm Coated Cut Level D Safety Gloves

GKUTNX500

CUT D 15 NEWTONS FORCE 4 out of 4 abrasion resistant Made by UCI

From £3.80
ex. vat

in stock

Uci PU Palm Coated Cut Level C / 5 Kutlass Safety Glove 4543

GKLASSPU500

CAT II Intermediate Risk 4 out of 4 abrasion resistant Weight of Single Size 9 Glove Made by UCI

From £3.60
ex. vat

IN STOCK

Uci Typhan EN388 ISO Cut Level E (5) PU Coated Safety Gloves

GTYPHAN

CAT II Intermediate Risk EN388:2016 4/4 Abrasion,5/5 Cut, 4/4 Tear, 4/4 Puncture, ISO Cut E CUT E 22 NEWTONS FORCE 4 out of 4 abrasion resistant Made by Uci Sanitised 7 TO 10

From £6.00
ex. vat

Showing 1 to 68 of 68 (1 Pages)

GlovesnStuff have supplied high quality sheet metal handling gloves across the UK for many years and are available to answer or help with any technical questions you may have. Many sheet metal workers use large tools and machinery, but also use snips and sheers for specific jobs and it is recommended that we fold at least one edge away, to reduce the possibility of sever cuts. The reality is that on occasion, even following metal working safety measures strictly, still produces a level of risk, so wearing the correct PPR gear is imperative. Protecting arms and hands is the obvious priority, along with protecting eyes and face, so work visors and sheet metal work gloves should be on top of the list of PPE in this environment. Call our friendly staff or simply order your metal work gloves online now for great pricing, swift delivery and great service.