Heavy Duty Green Double Dipped Vertek PVC Knit Wrist Abrasion Resistant Glove

  • Product Code: GV325
  • Availability: Available
  • £1.74

    Lowest price
  • £2.09 inc. VAT


  • Heavy Duty Green Double Dipped Vertek PVC Knit Wrist Abrasion Resistant Glove
1+ 12+ 36+ 72+ 144+
£2.74 (£2.28 ex. vat) £2.57 (£2.14 ex. vat) £2.41 (£2.01 ex. vat) £2.26 (£1.88 ex. vat) £2.09 (£1.74 ex. vat)
Glove Size Qty
XLarge (10)
Total price: £0.00 £0.00 ex. vat Add to Basket

Vetek Premium Green Double Dipped PVC Knit Wrist Gloves

Granular finish on the hand portion improves grip, 
especially in oily conditions. 
Increased thickness over standard PVC provides additional wear and 
abrasion resistance. 
Sanitized® to promote freshness, hygiene and odour repellence. 
Fully REACH compliant and Phthalate free formulation.

Good resistance to oils and solvents. 
General handling in oily conditions, refining.
Sizes available: 9.5" 



Both new and used gloves should be thoroughly inspected
before being worn to ensure no damage is present.
Gloves should not be left in a contaminated condition if reuse is
intended in which case gloves should be cleaned as far as possible.
Washing of these gloves is not recommended.
Gloves may be washed with mild detergent then rinsed with
clean water and allowed to dry, ideally with some air movement.
Care should be taken when removing gloves to avoid any
contaminant contacting bare skin.


Gloves should be ideally stored in cool dry conditions in the original
package and out of direct sunlight.


When stored as recommended will not suffer change in mechanical
properties for up to 5 years from
the date of manufacture.
Service life cannot be specified and depends on the application and
responsibility of the user to ascertain the suitability of the glove for the
intended use.


None of the materials or processes used in the manufacture of these
products are known to be harmful to the wearer.


The results of physical tests should help in glove selection,
however it must be understood that actual
conditions of use cannot be simulated and it is the responsibility
of the end user and not the manufacturer to determine glove
suitability for the intended use.