CUT C Gloves

Cut Level C cut resistant gloves, tested to the new EN388:2016 straight blade test, withstand 10 Newtons of cutting force (1020g). The Straight Blade Cut Test provides a more accurate indication of cut protection against an actual cut. Comparing the Coup Test and Straight Blade Test is like comparing a Pizza Cutter and a Stanley Knife, so ensuring that you buy the right cut level glove is imperative. Glovesnstuff have not only the stock and bulk buy options for great pricing on all cut resistant gloves, but also the knowledge and experience to ensure you acquire the best quality level C cut resistance.

Product Compare (0)

Sort By:

Show:

Available

WonderGrip WG-1875 DEXCUT®

GWG-1875

EN388 4X32C CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant EN407 - X1XXXX 100C contact heat Touch screen compatible Reinforced thumb crotch 18 gauge Eighteen stitches knitted per inch, ultra lightweight styles wonder grip brand SIZES SMALL TO 2XLARGE

From £6.64
ex. vat

Available

WonderGrip DEXCUT 633 Cut, Cold, Heat Resistant Heavy Duty Gloves

GWG-633

EN388 3X43C CUT C 10 NEWTONS FORCE EN407 X2XXXX CONTACT HEAT TESTED TO 250C EN511 X1X SUITABLE DOWN TO MINUS 10C 10-gauge Ten stitches knitted per inch, medium weight styles REACH - Registration, Evaluation, Authorisation and Restriction of Chemicals OEKO-TEK Stadard 100. Wonder Grip Accredtation No 17.HCN.14623 sizes small to 2xlarge

From £5.19
ex. vat

IN STOCK

Dexcut Air Lite Cut Level C Foam Nitrile Coated Wonder Grip Gloves

GWG640

CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant a size 9 glove weighs 38g Wonder Grip certifies that all the raw materials used in the manufacture of its products conform to European Union regulations (regulation n°1907/2006) oeko-tek standard Wonder Grip Technology GRIP THERMO-SET PRE-CURVED DESIGN TECHNOLOGY

From £4.59
ex. vat

Available

Wonder Grip Dexcut 758L Chemical, Cut, Heat Resistant Ultra Thin Gauntlets

GWG758L

CAT III complex design for high risk UKCA approved EN388:2016 4X44C CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant en407: X1XXXX 100°C contact heat resistance TYPE B RESISTANT TO CHEMICALS Protection against micro-organisms (bacteria and fungi) 15 GAUGE fifteen stitches knitted per inch, lightweight styles wonder grip brand size small to 2xlarge

From £10.17
ex. vat

IN STOCK

Opty Wonder Grip OP 775 Cut C PU Palm Safety Gloves

GOP775

CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant 13-gauge Thirteen stitches knitted per inch, lightweight styles wonder grip brand

From £3.68
ex. vat

Available

Nitrex 241 Ultra Lightweight PU Cut Resistant Level C Gloves

G241PC18

18 gauge Eighteen stitches knitted per inch, ultra lightweight styles

From £3.82
ex. vat

IN STOCK

Traffi Green Cut C Lightweight 13g Breathable X Dura PU Coated Gloves

GTG5210

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant 360 Breathable 13-gauge Thirteen stitches knitted per inch, lightweight styles a size 9 glove weighs 29g

From £2.59
ex. vat

Available

DuPont™Kevlar® Volcano Cut C & Contact Heat 350 degrees 32cm Safety Gloves

GKK400-7564

CUT C 10 NEWTONS FORCE Heat Protection to 350C Resistance to flammability en407 small molten metal level 2 POLYCO BRAND genuine dupont kevlar

From £19.00
ex. vat

Available

Traffi 3 Digit Green Cut C PU Coated Gloves TG5220

GTG5220

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant a size 9 glove weighs 29g Traffic Light System

From £5.30
ex. vat

IN STOCK

B-Flex Blue & Gold Fully Lined 350 degrees Flame Retardant Type A Welders 16" Gauntlet

GBFHQW

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant Resistance to flammability CONTACT HEAT TO 350C Beeswift brand One Size

From £4.94
ex. vat

Pre-Order

Portwest Cut Resistant Gloves Nitrile Touchscreen Work Gloves

GCT21

PRE ORDER FOR MARCH

Cut Resistant Level C
Touchscreen Compatibility
High Dexterity Performance

PORTWEST BRAND

From £5.53
ex. vat

Available

Nitrex 340RFI Cut Level C Anti Impact Nitrile Coated Gloves

G340RFI

13-gauge Thirteen stitches knitted per inch, lightweight styles

From £10.01
ex. vat

Available

Comfort Plus Soft Feel Cut C PU Coated Rhinoyarn Gloves

G53-3314

Soft Feel Comfort
Enhanced Dexterity
Easy Touchscreen Use

tlsatec brand

From £4.13
ex. vat

Available

Ultra Lightweight 18 Gauge Tilsatec PU Coated Rhino Yarn™ Cut C Gloves

G58-3710

Ultra Lightweight Design
High Tear Resistance
Durable PU Coating

tlsatec brand size 7 to 11

From £3.09
ex. vat

IN STOCK

Cut C Smartswipe Milwaukee Textured Nitrile Coated Safety Gloves

GMW7142X

CAT II Intermediate Risk 4 out of 4 abrasion resistant Touch screen compatible 1 size 9 glove weighs 33g

From £7.59
ex. vat

in stock

20" DuPont™Kevlar® Double Knit Cut and Heat Protection Safety Sleeve with Knit Wrist

GKKSL20-7553

CUT C 10 NEWTONS FORCE contact heat level 2 - 250°C Wash at 40°C using non-biological detergent POLYCO BRAND genuine dupont kevlar

From £5.99
ex. vat

in stock

Traffic Light Orange Hantex PU Palm Coated Cut Level 3 / B Safety Gloves

GKUTPU3OR

CE/UKCA APPROVED EN388:2016 4X43C CUT LEVEL C 4 out of 4 abrasion resistant Traffic Light System Weight of Single Size 9 Glove HANTEX BRAND BY UCI

From £3.60
ex. vat

IN STOCK

Uci Part Fingerless Traffic Light Orange Cut Level 3 / C PU Coated Safety Glove

GKUTPU3O12

CE/UKCA APPROVED EN388:2016 4X43C CUT LEVEL C 4 out of 4 abrasion resistant Touch screen compatible 360 Breathable Traffic Light System HANTEX BRAND BY UCI Weight of Single Size 9 Glove

From £2.94
ex. vat

Available

Tilsatec Eco-Friendly Work Gloves Cut Level C Premium Gloves

G55-3725

Cut Level C Protection
Eco-Conscious Design
Touchscreen Compatibility

From £7.77
ex. vat

IN STOCK

Tek Blue Cut 5 C Sandy Nitrile Safety Glove with Thumb Crotch

GTEKBLUE

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch Made by Klass

From £3.50
ex. vat

IN STOCK

Dytec Klass 18 gauge Ultra Lightweight Cut C Foam Nitrile Safety Gloves

GTEK8000

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant a size 9 glove weighs 21g DYTEC fibres

From £3.90
ex. vat

in stock

Klass Tek 5C PU Coated Cut Level C Safety Gloves

GTEK5C

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant a size 9 glove weighs 29g

From £1.30
ex. vat

IN STOCK

Cut C Touch Screen with Thumb Crotch Breathable Pawa PG310 Safety Gloves

GPG310

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch TOUCH SCREEN CAPABLE 360 Breathable a size 9 glove weighs 40g PAWA brand

From £3.45
ex. vat

IN STOCK

Cut Level C Heat Resistant PU Coated Safety Gloves

GA622

CAT II Intermediate Risk en388:2016 4X43C CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant en407: X1XXXX 100°C contact heat resistance Portwest brand size 6 to 12

From £2.77
ex. vat

IN STOCK

Klass Tek Cut Level 5 Black PU Palm Coating on HPPE Grey Liner Safety Gloves 4543

GTEK5000/5

CAT II Intermediate Risk 4 out of 4 abrasion resistant Made by Klass

From £2.90
ex. vat

in stock

Click Kutstop Traffic Light Green Cut 5 Foam Nitrile Safety Gloves 4544

GKS5NF

CAT II Intermediate Risk 4 out of 4 abrasion resistant Traffic Light System Red Cut 1, Orange Cut 3, GREEN CUT 5 Weight of Single Size 9 Glove Click KUTSTOP brand

From £3.50
ex. vat

IN STOCK

Traffi Secure Safety Cut Level 5 Wet and Dry Work Glove

GTG535

CAT II Intermediate Risk 4 out of 4 abrasion resistant Traffic Light System

From £7.01
ex. vat

IN STOCK

Hydric 5 Cut Level C Water & Oil Proof Green Traffi Safety Glove

GTG5060

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant Traffic Light System Colour available

From £7.40
ex. vat

IN STOCK

Traffi Green MicroDex Nitrile Foam Coating Safety Glove

GTG5140

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant Reinforced thumb crotch a size 9 glove weighs 30g Traffic Light System

From £7.53
ex. vat

IN STOCK

Traffi Extended Cuff Morphic XP5 Wrist & Forearm Cut 5 C Gloves 4544

GTG5150

CAT II Intermediate Risk 4 out of 4 abrasion resistant Reinforced thumb crotch Traffic Light System

From £10.00
ex. vat

Only 16 Left

Clear Silicone Rubber Coated Cut C Hot Melt use Gloves

GTG5120

CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant

From £9.39
ex. vat

IN STOCK

Klass Tek Green Cut Level C PU Palm Coating on HPPE Liner Safety Gloves

GTEK5000G

CAT II Intermediate Risk 4 out of 4 abrasion resistant Made by Klass

From £2.90
ex. vat

IN STOCK

Deltaplus Venicut Food Safe 100 Degree Cut Level 5/C TAEKI® 5 Safety Gloves

GVEN55

CAT II Intermediate Risk Contact level 1 for heat handling Tested For Food Use Made by Delta Plus

From £3.92
ex. vat

Available

ATG MaxiChem Cut C Chemical Resistant 35cm Rubber Gauntlet

G76-733

EN388 4341C CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant en407: X1XXXX 100°C contact heat resistance TYPE A KLMNOP FOOD SAFE ATG BRAND SIZES SMALL 7 TO 2XLARGE 11

From £12.30
ex. vat

in stock

Kutstop Cut 5 Black PU Palm Coating on Nylon/Spandex Grey Liner Safety Gloves 4543

GKSPU5

CAT II Intermediate Risk 4 out of 4 abrasion resistant a size 9 glove weighs 32g Made by Click Kutstop

From £2.30
ex. vat

IN STOCK

Klass Crystal Glass Foamed Latex Palm Coated Cut Level 5 Safety Gloves 4544

GCRYSTAL

CAT II Intermediate Risk 4 out of 4 abrasion resistant Made by Klass

From £4.55
ex. vat

IN STOCK

Klass Tsunooga Fibre Traffic Light Green 15 gauge Lightweight PU Coated Cut 5 Safety Gloves

GS900

CAT II Intermediate Risk 4 out of 4 abrasion resistant Traffic Light System Made by Klass

From £4.05
ex. vat

Only 1 Left

NGF Semi Fingerless Cut 5 Lightweight Safety Gloves 4542

GS901

CAT II Intermediate Risk 4 out of 4 abrasion resistant

From £3.80
ex. vat

in stock

Water Based PU Coat Cut 4 Gloves DMF, Solvent, Lint & Silicone Free 4443

GTEK1002

CAT II Intermediate Risk EN388 4/4 Abrasion, 4/5 Cut, 4/4 Tear, 3/4 Puncture Cut Level 4 4 out of 4 abrasion resistant Weight of Single Size 9 Glove Colour Available Made by Klass

From £4.09
ex. vat

Available

ATG MaxiCut Dry 34-470 Cut Resistant Level 5 / C 1.3mm Palm Safety Gloves

G34470

CAT II Intermediate Risk 4 out of 4 abrasion resistant Made By ATG

From £16.77
ex. vat

IN STOCK

Klass Cut & 100 Degree Heat Resistant Aramid Fibre & Nitrile Knuckle Coated Safety Gloves

GTEK530

CAT II Intermediate Risk 4 out of 4 abrasion resistant Heat Protection to 100C Made by Klass

From £4.80
ex. vat

IN STOCK

MaxiCut Ultra Cut Resistant Level 5 / C 1mm Thin Palm Safety Gloves 4542

G443745

CAT II Intermediate Risk 4 out of 4 abrasion resistant Weight of Single Size 9 Glove Made By ATG

From £10.32
ex. vat

IN STOCK

Polyco 250 Degrees Integral Liquid and Steam Barrier Heavy Duty Terry Cloth Bakers Oven Mitt

G7724

CAT II Intermediate Risk CUT C 10 NEWTONS FORCE Heat Protection to 250C POLYCO BRAND

From £10.86
ex. vat

Available

Uci Nitrile Palm on HPPE Cold Weather and Cut Resistant Level 5 Freezer Glove 4544

GACEMAX5

CAT || Minimal Risk 4 out of 4 abrasion resistant Made by UCI

From £6.30
ex. vat

in stock

INTERCEPT™ Cut Resistant Level 5/C Hyflex® 11735 PU Palm Safety Gloves

GAN11-735

CAT II Intermediate Risk Cut Level 5, New ISO Cut Level C 4 out of 4 abrasion resistant INTERCEPT Cut Resistant Technology Made by Ansell

From £7.49
ex. vat

IN STOCK

Hantex® Cut 5 New Test Cut C Sandy Nitrile Coated Safety Gloves

GHX5SN

CAT II Intermediate Risk 4 out of 4 abrasion resistant

From £3.70
ex. vat

CLEARING

Polyco Matrix Green PU Fingerless Traffic Light Green Cut 5 Safety Gloves 4543

GMPG-FLx

CAT II Intermediate Risk 4 out of 4 abrasion resistant Traffic Light System Weight of Single Size 9 Glove POLYCO BRAND

From £6.65
ex. vat

IN STOCK

Uci Nitrile Foam Palm Coat Kutlass Green HPPE Liner Cut 5/C Safety Glove

GNF500G

CAT II Intermediate Risk 4 out of 4 abrasion resistant Traffic Light System Weight of Single Size 9 Glove

From £4.70
ex. vat

IN STOCK

Uci Part Fingerless Green PU Palm Kutlass Cut Level 5/C Safety Glove 4543

GPUKUT500G12

CAT II Intermediate Risk 4 out of 4 abrasion resistant Traffic Light System Sanitised Made by UCI

From £5.20
ex. vat

in stock

Uci PU Palm Coated Cut Level C / 5 Kutlass Safety Glove 4543

GKLASSPU500

CAT II Intermediate Risk 4 out of 4 abrasion resistant Weight of Single Size 9 Glove Made by UCI

From £3.60
ex. vat

in stock

Uci Traffic Light Green PU Palm Kutlass Cut Level 5/C Safety Glove 4543

GPUKUT500G

CAT II Intermediate Risk 4 out of 4 abrasion resistant Traffic Light System Weight of Single Size 9 Glove Sanitised Made by UCI

From £4.90
ex. vat

Available

Uci XPro 5 Knuckle Coated Cut Level 5 / C NitraDry™ Foam Safety Gloves

GXPRO5KC

CAT II Intermediate Risk en388:2016 4X42C cut level C (was 5) 4 out of 4 abrasion resistant Made by UCI size small to xl

From £4.20
ex. vat

IN STOCK

Uci XPro 5 Soft Feel Cut Level 5 / C NitraDry™ Foam Safety Gloves

GXPRO5

CAT II Intermediate Risk EN388:2016 4X42C CUT C 10 NEWTONS FORCE 4 out of 4 abrasion resistant Made by UCI SIZES SMALL TO XLARGE

From £4.75
ex. vat

Showing 1 to 53 of 53 (1 Pages)

Cut Level C Cut Resistant Gloves

The level C gloves above are of the highest quality and are an ideal solution for the environment. For more information on the new cut test and how the scores are achieved, take a look at our article HERE

For our full category page on all cut resistant gloves, click here.