Blue PVC Chemical, Cold Resistant Food Safe Gauntlets 12"
- Product Code: GR530
- Availability: IN STOCK
-
£2.77
Lowest price
EXCL VAT - £3.32 inc. VAT
1+ | 10+ | 40+ | 80+ | 120+ |
---|---|---|---|---|
£3.95 (£3.29 ex. vat) | £3.71 (£3.09 ex. vat) | £3.59 (£2.99 ex. vat) | £3.46 (£2.88 ex. vat) | £3.32 (£2.77 ex. vat) |
Glove Size | Qty |
---|---|
Large (9) | |
XLarge (10) | |
XXLarge (11) |
PowerShield Triple Dipped Oil Resistant Blue PVC Cold and Chemical Resistant Gauntlets
Extra soft Blue PVC 12" 30cm Cold Weather Gauntlet stays flexible and supple at low temperatures
Special Sand finish to hand area improves grip especially in wet conditions.
Interlock Liner which is Actifresh® treated. Fully REACH compliant and Phthalate free formulation
Typical applications: General handling of concentrated acids & alkalis, refining,
janitorial, oily conditions, fishing, marine, Fisheries, oil industry.
Sizes Available: L,XL,XXL
TECHNICAL DETAILS
Mechanical test data in accordance with EN 388
Abrasion Resistance Level 4
Cut Resistance Level 1
Tear Resistance Level 2
Puncture Resistance Level 1
Chemical test data in accordance with EN 374 (2003)
Chemicals BTT (min) Class
n-Heptane (J) 39 2
40% Sodium Hydroxide (K) >480 6
96% Sulphuric Acid (L) 160 4
Dexterity Performance Level 5(EN420:2003)
Note:-Not recommended for use with concentrated corrosive liquids OTHER INFORMATION
Sanitized®: These gloves incorporate a Biocidal product. The Biocidal treatment protects against a
broad spectrum of Bacteria and Fungi.
The active Biocidal substance - Zinc Pyrithione - promotes freshness and inhibits odours.
CLEANING /MAINTENANCE
Both new and used gloves should be thoroughly inspected before being worn to ensure no damage is
present. Gloves should not be left in a contaminated condition if reuse is intended in which case gloves
should be cleaned as far as possible. Washing of these gloves is not recommended. Gloves may be
washed with mild detergent then rinsed with clean water and allowed to dry, ideally with some air
movement.Care should be taken when removing gloves to avoid any contaminant contacting bare skin.
STORAGE
Gloves should be ideally stored in cool dry conditions in the original package and out of direct sunlight.
OBSOLESCENCE
When stored as recommended will not suffer change in mechanical properties for up to 5 years from the date of manufacture.
Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the
glove for the intended use.
GENERAL
None of the materials or processes used in the manufacture of these products are known to be harmful
to the wearer.
PLEASE NOTE
The results of physical tests should help in glove selection, however it must be understood that actual
conditions of use cannot be simulated and it is the responsibility of the end user and not the
manufacturer to determine glove suitability for the intended use.
Click to download Test Certificate GR530.pdf
Click to download Test Certificate GR530 (Regulation).pdf
Click to download Data Sheet GR530 (Directive).pdf
Click to download Data Sheet GR530 (Regulation).pdf
Click to download Declaration of Conformity GR530 (Directive).pdf
Click to download Declaration of Conformity GR530 (Regulation).pdf