Nitrile Palm Coated Gloves
(82 products)Nitrile palm coated gloves put the grip where your hand actually does the work: across the palm and fingertips. The back of the hand stays as open knit, so the glove breathes and stays light over a full shift. The coating is the easy part. The real choice is the liner underneath, from a standard polyester knit for general handling up to an HPPE cut liner rated EN 388 Level F.
Why Nitrile on the Palm?
Nitrile holds its grip on oily and greasy parts, stands up well to abrasion and contains no latex proteins, so there's no latex allergy risk. Dipping only the palm keeps the glove cooler and more flexible than a fully coated one. The trade-off? That open back lets water and oil soak through. For wet work, look at waterproof work gloves instead.
Key Features
- Cut levels A to F: general handling gloves through to Level F liners for sheet metal and glass
- 13, 15 and 18 gauge liners: the higher the gauge, the thinner the knit and the better your fingertip feel
- Grip finishes: smooth, micro-foam, sandy and micro-dot nitrile for dry or oily handling
- Touchscreen and food-safe options: check each listing for the exact spec
Who These Suit
Palm coated nitrile gloves are a go-to for mechanics, assembly lines, warehouse picking, construction and general maintenance. You'll find Wonder Grip, Portwest, Traffi, ATG, Unigloves Nitrex, Ansell, Delta Plus and Showa in the range. Need finer feel for precision assembly? Compare with PU coated gloves, or browse the full nitrile gloves range.
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Portwest
Portwest Nano Thermo Pro Gloves Cold Weather Liquid Repellent
GAP02
Regular price From £4.75 exc VAT — £5.70 inc VATUnit price /UnavailableKutlass
Kutlass NF500G+ Cut Resistant Gloves Level D XREY Nitrile Safety Gloves
GNF500G
Regular price From £5.85 exc VAT — £7.02 inc VATUnit price /Unavailable
What Palm Coated Actually Means
A palm coated glove is a knitted liner dipped so the coating covers the palm and fingertips only. The back of the hand stays uncoated. That one detail decides where the glove works well and where it doesn't.
- Palm coated: lightest and most breathable. Best for dry or lightly oily handling over long shifts.
- 3/4 or knuckle coated: the dip runs over the knuckles too. Better against knocks and splashes on the back of the hand.
- Fully coated: sealed all round. Use these when hands will be wet or in oil, accepting more heat and less flexibility.
A common mistake is buying palm coated gloves for wet work. However good the nitrile, rain and oil come straight through the open back. Match the coating coverage to how wet the job gets.
Reading the EN 388 Code
Most gloves in this range are tested to EN 388, the European standard for mechanical risks. The current version, EN 388:2016+A1:2018, prints a code of four numbers and one letter. In order: abrasion (1 to 4), coupe cut test (1 to 5), tear (1 to 4), puncture (1 to 4), then the ISO 13997 cut level (A to F). A sixth character, P, shows the glove passed the impact test.
An X means that test wasn't done or doesn't apply. High-performance cut yarns often blunt the coupe blade, so cut gloves usually show X in the second position and you read the letter instead. Gloves here run from general handling models with no cut rating through to Level F, the top of the scale at 30 newtons of blade force. Many also list EN ISO 21420, which covers general requirements like fit, dexterity and safe materials, and some carry EN 407 contact heat ratings. Check each listing for its full code.
Liners and Gauge
The liner sets the cut protection, comfort and feel. Polyester and nylon liners suit general handling, picking and assembly where cuts aren't the main risk. HPPE liners, sometimes blended with glass fibre or steel, are what give these gloves their cut letter.
Gauge refers to the number of needles per inch on the knitting machine, so a higher number means a finer, thinner knit. A 13 gauge liner is the hard-wearing all-rounder. 15 and 18 gauge liners bring the glove closer to bare-hand feel for small parts, fixings and screen use, with some loss of padding and durability.
Nitrile Finishes and Grip
- Smooth nitrile: a flat, sealed surface that wipes clean and suits dry handling.
- Foam and micro-foam nitrile: a porous surface that helps grip on lightly oily parts and feels softer in the hand.
- Sandy nitrile: a rough, textured finish for a stronger hold on wet or oily components.
- Micro-dot palms: raised dots that add grip without making the glove much thicker.
Common Specification Mistakes
Over-specifying is just as common as under-specifying. A Level F glove on a warehouse picker handling cardboard adds cost and bulk and takes away dexterity for no benefit. Match the cut letter to the sharpest thing being handled, and let your risk assessment set the final level.
Don't confuse the old 1 to 5 cut score with the A to F letters either. They come from different tests and don't line up. And remember that cut ratings cover slicing, not stabbing. If wire ends, nails or needles are the hazard, check the puncture digit or look at specialist needle-resistant gloves.
Care and Replacement
Replace gloves once the coating cracks, peels or wears through on the fingertips, or the liner holes. A worn palm loses both grip and protection. Washing advice varies by manufacturer, so follow the care information on each product page before laundering.